background image

10

EN

•  Do not remove, cover or alter the rating plates fitted to the machine 

body and ensure their prompt replacement in case of damage.

•  Ensure that the product holder, receiving tray, surrounding areas and 

floor are kept clean and dry at all times.

•  Do not use the slicer as a supporting surface or lay any object on it 

that is extraneous to normal slicing operations.

•  Place and remove the goods to be sliced on the sliding plate only with 

the platter completely retracted (

away from the blade

) and the cart 

totally towards the operator.

  DO NOT use slicing accessories that have not been supplied 

by the slicer manufacturer.

•  Do not damage the blade by cutting hard objects such as bones.

•  If the size of the food to be sliced is higher than those indicated under 

“Working cut” in the table “Technical specifications”, reduce its size to 

work safely.

GENERAL WARNINGS

11

EN

•  This device is guaranteed for 24 

months. 

  The purchase date must be proven with 

the relevant document.

  In the absence of valid fiscal document, 

the warranty claim  can not be exercised. 

•  In case of non-compliance the claim 

must be made in writing within two 

months from the observation of the 

defect attaching the tax document, 

compiled in the act of buying, with stamp 

and signature of the store. 

Manufacturer’s warranty and liability

•  The guarantee of proper operation and 

full compliance of the machines to their 

intended service depends on the correct 

application of the instructions contained 

in this manual.

• 

The manufacturer is not responsible 

directly and indirectly for any damage 

caused by improper use of the device 

resulting from:

-  failure to follow instructions contained 

in this manual;

-  use not in accordance with specific 

regulations, in force in the country of 

installation;

-  changes and / or unauthorized 

repairs;

-  use of accessories and unoriginal 

spare parts;

misuse of the machine with different 

functionalities from the one it has 

been built for

.

incorrect installation

.

failure  to  comply  with  the  specific 

power techniques

insufficient  or  incomplete  periodic 

maintenance

.

use by people under the age of 18

.

use by people whose physical, 

sensory or mental skills are reduced

.

exceeding the loading limits allowed 

by the machine

use in environments different from 

the food one

exceptional events

.

MANUFACTURER’S WARRANTY AND LIABILITY

 

403003 G21E 

10/47

Summary of Contents for 250rr
















































Reviews: