Mace MPR-HQ-1600 Series, Quick Start Manual

Page: 6 / 28

5 22
Slow play Multiple slow play speeds or normal playback.
Assistant Fn
One-window monitor mode, click this button to display assistant function: PTZ control and
image color.
Backspace function: in numeral control or text control, press it for 1.5 seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and direction keys to activate setup.
In text mode, click it to switch between numeral, English character(small/capitalized) and
other.
Activate other special functions.
Fast play Various fast speeds and normal playback.
Play previous In playback mode, playback the previous video
Reverse/Pause
In normal playback or pause mode, click this button to reverse
playback. In reverse playback, click this button to pause playback.
Play Next
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
Play/Pause
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
Window switch Mult Click it to switch one-window/multiple-window.
Shuttle (outer ring)
In real-time monitor mode shuttle ring functions as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to reverse.
Jog (inner dial)
Up/down direction key. Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
USB port To connect USB storage device, USB mouse.
Remote control
indication light
ACT Remote control indication light
Status indication
light
Status If there is Fn indication light, current status indication light is null.
Power indication
light
PWR PWR Power indication light
Record light 1-32 On when system is recording.
IR Receiver IR Receiving signal from the remote control.
2.8 PaN/TILT/ZOOM
Please note:
• Slight differences may be found in the user’s interface, due to various protocols.
• Please make sure the speed dome A/B cables are properly connected to the A/B ports
of the DVR.
• You have properly set all PTZ information.
• Switch camera monitor channel to current window.
2.8.1 PTZ SeTuP
The pan/tilt/zoom setup includes the following items. Please select the channel first. See
Figure 2-16.
• Protocol: Select corresponding PTZ protocol such as MSP-SD.
• Address: Input corresponding PTZ address.
• Baud rate: Select baud rate.
• Data bit: Select data bit. Default value is 8.
• Stop bit: Select stop bit. Default value is 1.
• Parity: There are three choices: none/odd/even. Default value is none.
Figure 2-16
After completing setup click the save button. The system goes back to the previous menu.
2.8.2 PTZ OPeraTION
In one window display mode, right click mouse (click “Fn” Button in the front panel or click
“Fn” key in the remote control). The interface is shown as in Figure 2-17.
Figure 2-17