8
i. USB Unmount Button
• Used to safely remove the connected USB device
NOTE:
After long pressing the Unmount button for four seconds, the
Power LED starts flashing. When the Power LED resumes the
steady amber light, you can remove the USB device safely.
j. DC Power Connector
• Connects the AC power adapter, in order to supply power to
the camera.
k. WPS Button
• Used to protect your WLAN—instead of entering the network
name (SSID), your wireless network can be protected simply by
pushing a button
TIP:
For more information on the WPS button see:
Network » Wireless » WPS Settings
l. GPIO Connectors
• Used to connect external devices
m. Reset Button
• Restarts the camera when it is pressed quickly
• Resumes factory default settings when it is pressed and held
for five seconds
n. Wireless Antenna Connector
• Used to attach the external antenna
o. Ethernet Cable Connector
• Connects the network cable, which supports the NWay
protocol so that the camera can detect network speed
automatically
p. Audio-out Connector
• Connects an external active speaker