manualshive.com logo in svg

Mace Easy Watch EWIP-DOM-WIFI, Product Manual, Page: 41 / 71

Share
Download
Mace Easy Watch EWIP-DOM-WIFI Product Manual Download Page 41

41

  Light Frequency

  Select the proper frequency according to the camera’s location to reduce the 

noise: 50Hz, 60Hz, or Outdoor.

4.6.2  Video & Audio » Video

• H.264

  Video Resolution

  Select the desired video resolution from the four formats: SXGA, VGA, QVGA 

and QQVGA. The higher setting (VGA) obtains better video quality, but it uses 

more resources within your network.

  Video Quality

  Select the desired image quality: Lowest, Low, Medium, High, and Highest.

  Frame Rate

  Select a proper setting (1–30) depending on your network status.

• MPEG4

  Video Resolution

  Select the desired video resolution from the three formats: VGA, QVGA and 

QQVGA. The higher setting (VGA) obtains better video quality, but it uses 

more resources within your network.

  Video Quality

  Select the desired image quality: Lowest, Low, Medium, High, and Highest.

  Frame Rate

  Select a proper setting (1–30) depending on your network status.

• MJPEG

  Video Resolution

  Select the desired video resolution from the four formats: SXGA, VGA, QVGA 

and QQVGA. The higher setting (VGA) obtains better video quality, but it uses 

more resources within your network.

  Video Quality

  Select the desired image quality: Lowest, Low, Medium, High, and Highest.

  Frame Rate

  Select a proper setting (1–30) depending on your network status.

Summary of Contents for Easy Watch EWIP-DOM-WIFI








































































Reviews:

No comments