21
3.3 Configuring the IP address of the PC
If you failed to access to the camera, please check the IP address of your
computer. Connect the camera to your computer directly to proceed. You
will need to set up both IP addresses to be in the same segment for the
two devices to communicate.
1. On your computer, click
Start > Control Panel
to open the
Control Panel window.
2. Double-click
Network Connection
to open the Network
Connection window.
3. Right-click
Local Area Connection
and then click
Properties
from the shortcut menu.
4. When the Local Area Connection Properties window
appears, select the
General
tab.
5. Select
Internet Protocol [TCP/IP]
and then click
Properties
to
bring up the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment
of the camera, select the
Use the following IP address
option. Then, enter an IP address into the empty field.
The suggested IP address is 192.168.0.X (X is 1–254 except
30), and the suggested Subnet mask is 255.255.255.0.
7. When you are finished, click OK.