43
4.6.4 Video & Audio » Overlay/Mask
This sub-menu is used to set the image overlay and mask
features of the camera.
• Image Overlay
This item allows you to set the image overlay.
In the
Image File
option, click Browse to select the image file from your
computer, and then click Upload. You can click Preview to check the image
size and adjust the image position before clicking Upload. The preview image
area is displayed with a dotted red line. If you want to remove the preview
image before uploading, click Delete.
After clicking Upload, the preview image area will display a dotted white line.
Click Enable to set the transparency option. Click Apply. You will now see the
image overlay on the live view image when you click Live View.
NOTE:
The width and height of the input overlay graphic should be in
multiples of 4 with a maximum size of 43,690 pixels. It must be in
JPG or BMP (24-bit RGB) format.
• Privacy Mask
This item allows you to configure up to two mask areas.
Select area 1 or 2 from the
Window
pull-down list, and then click Enable.
You can change the size and position of the area by holding and dragging the
mouse.
You can also change the color of the mask area by clicking the
Color
box and
then selecting the color you want. When done, click Apply. You will now see
the mask area(s) on the live view image when you click Live View.