UNLOADING AND ASSEMBLY
Form # 169080
Issue – April 2007
29
D. INSTALL SIDE DEFLECTORS
a. Install side deflector hinge bolt through top
cover.
b. Position front deflector (A) inside side support
and onto end of hinge bolt (B). Adjust front
deflector position so that nut can be installed
on bolt. Install two bolts (C) to secure front
deflector piece. Bolt heads should face
inboard.
c. Remove hinge bolt (B). Position side deflector
(D) inside forming shield and locate hinge
between hinge supports. Re-install hinge bolt
(B), install nut and tighten.
d. Install side deflector position adjuster bolt,
washers, and handle. Position side deflector
at mid position and tighten handle.
e. Repeat steps a. to d. for opposite side.
A
B
C
D
B
