UNLOADING AND ASSEMBLY
Form # 169080
Issue – April 2007
12
STEP 5. REMOVE CUTTERBAR
COMPONENTS
a. Cut banding securing forming shield side
deflectors to cutterbar and remove
components from cutterbar. Set aside for later
installation.
WARNING
Ensure cutterbar is completely clear of
foreign objects. These objects can be
ejected with considerable force when the
machine is started and may result in
serious injury or machine damage.
b. Thoroughly check cutterbar area for wooden
blocking, banding, and hardware that may
have fallen between discs.
c. Close cutterbar doors. Ensure that curtains
hang properly and completely enclose
cutterbar area. Minor creases in curtains will
eventually straighten out.
NOT ACCEPTABLE
ACCEPTABLE
