UNLOADING AND ASSEMBLY
Form # 169080
Issue – April 2007
23
C. HYDRAULICS/ELECTRICAL
WARNING
Do not use remote hydraulic system
pressures over 3000 psi (20684 kPa).
Check your tractor manual for remote
system pressure.
a. Install quick disconnect couplers onto hydraulic
hoses at front of hitch as per following table.
Use #8 ORB (3/4 inch – 16 UNF Thread).
SYSTEM
HOSE
TRACTOR
HYDRAULICS
Steering
R (2 Hoses)
Control 1
Lift
S (1 Hose)
Control 2
Header Tilt
T (2 Hoses)
Control 3 *
* Not required with tilt cylinder package
#B4851 (with selector valve), or with
mechanical center link).
NOTE
Arrows cut into plate indicate system for
hoses.
LIFT
STEERING
b. Connect two
steering
cylinder hoses (R) as
follows:
CONTROL
LEVER
POSITION
CYLINDER
MOVEMENT
WINDROWER
DIRECTION
Forward
Extend
Right
Backward
Retract
Left
c. Connect one
lift
cylinder hose (S) as follows:
CONTROL
LEVER
POSITION
CYLINDER
MOVEMENT
HEADER
MOVEMENT
Forward
Retract
Lower
Backward
Extend
Raise
d. Connect two
header tilt
cylinder hoses (T) as
follows: (Not required with tilt cylinder package
#B4851 (with selector valve), or with
mechanical center link)
CONTROL
LEVER
POSITION
CYLINDER
MOVEMENT
HEADER
MOVEMENT
Forward
Retract
Lower
Backward
Extend
Raise
e. Connect the windrower wiring harness plug (U)
R
T
S
U
S
R
T
