MAINTENANCE/SERVICE
Form # 169089
75
Model Year - 2010
7.9.9 Bevel
Gearbox
The bevel gearbox is located inside the drive
compartment at the left hand side of the header.
If repairs are required, it should be removed and
serviced at your dealer. See 7.9.9.3 Removal –
Bevel Gearbox.
7.9.9.1 Checking
Oil
The bevel gearbox oil level should be checked
every 100 hours or once per year:
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Rest header onto blocks so that it is level.
b. Open LH drive shield (A).
c. Remove plug (B) and verify that the oil slightly
runs from the hole.
d. Replace plug and tighten.
e. Clean up any spilled oil.
16 FT SHOWN – 13 FT SIMILAR
B
A
16 FT
13 FT
