OPERATION
Form # 169089
18
Model Year - 2010
AFT VALVE BLOCK
FWD VALVE BLOCK
6.4 HEADER
DETACHMENT
Refer to the M150 & M200 Self-Propelled
Windrower Operator’s Manual for procedures for
mechanically detaching the header from the self-
propelled windrower. Refer to the following
procedures for disconnecting electrical harness
and hydraulic hoses.
CAUTION
To prevent accidental movement of
windrower, shut off engine, engage parking
brake, and remove key.
6.4.1 M200 – 13 FT & 16 FT
a. Move LH (cab forward) platform to rear of
windrower.
b. Disconnect the two hydraulic couplers from
windrower valve.
c. If grass seed header is being detached,
disconnect two couplers at the aft valve and the
single coupler at the forward valve.
d. Raise lever (A) and undo Velcro straps (B).
e. Move hose bundle (C) to store on header. If
grass seed header is being detached, there are
two hose bundles to store on the header.
f. Install caps on connectors and hose ends if
equipped.
(continued next page)
RETURN
PRESSURE
C
B
A
