MAINTENANCE/SERVICE
Form # 169089
61
Model Year - 2010
7.8.6.3
Driven and Suspended Deflectors - 16
Ft - Standard Header
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
CAUTION
Exercise caution when working around the
blades. Blades are sharp and can cause
serious injury. Wear gloves when handling
blades.
7.8.6.3.1 Driven
Deflector
Removal
a. Place a block of wood between two discs to
prevent deflector from turning.
b. Remove four bolts (A) and remove deflector (B).
Installation
a. Position deflector (B) on disc (C) and install bolts
(A) and torque to 92 ft·lbf (125 N·m).
b. Remove block of wood if used.
7.8.6.3.2 Suspended
Deflector
Removal
a. Place a block of wood between two discs to
prevent deflector from turning.
b. Remove four bolts (D) and nuts, and remove
deflector (E).
Installation
a. Position deflector (E) on flange and install bolts
(D) and nuts. Tighten to 92 ft·lbf (125 N·m).
b. Remove block of wood if used.
c. Close
doors.
RH SHOWN – LH OPPOSITE
A
B
C
RH SHOWN – LH OPPOSITE
E
D
