M150/M200 QUICK CARD
Form 169414
Rev. A
Page
2 of 4
Supplement to M150/M200 Operator’s Manual. See manual for greater detail.
MacDon’s Harvest Manager PRO (CDM/Cab Display Module)
Scrolls the top line
of display
on the
CDM
Reel Aft
Extends the Center
Link (Increase
header angle)
Lower the header
Retracts the Center Link
(Decrease header Angle)
Lower Reel
Reel Fore
Raise Reel
Raise the
header
Changes Reel
(D60/A40) or
Disc (R80)
speeds
SELECT button
changes the bottom
line of the display,
also works as the
enter button in
program mode.
PROGRAM button
aids with entering
and
exiting set-up
modes and key
shortcuts.
TURN SIGNAL buttons for
activation of turn indicators.
Operational only in Engine-
forward (transport) mode.
ENGINE WARNING
LIGHTS
Engine Pre-Heat,
Water in Fuel, Do not
Operate, Stop Engine
IGNITION POSITIONS area
provides reference for
ignition switch positions:
Accessory, Stop, Run, Start
AUGER or DRAPER SPEED control
allows for adjustment of draper or auger
speed, dependant on header attached.
HAZARD WARNING LIGHT switch
allows SMV flashing lights to be
activated. Operational in both cab
or engine forward.
HEADER INDEX button
activates the auto
Reel/Conveyor speed
features when green light is
illuminated.
RETURN TO CUT
button activates the
programmable function
when the green light is
illuminated.
FLOAT switches activate trim cylinders within
floatation linkage providing in-cab adjustment
to header floatation system. Left and right
cylinders adjust independently.
Ground speed
range switch
Deck Shift / Float
preset switch
DWA draper speed
DWA raise and lower
switch
Reverser Button- to activate hold
down and engage the header
(requires optional hydraulics)
Header Engage
switch
Optional