Break-In Service
Please Refer to Maintenance and Servicing Section of Operators Manual
Draper Clinic Handout
3
Find your operators manual at:
www.macdon.com/support/operators-manuals
At 50 hours
Change Hydraulic Oil Filter
Change hydraulic oil filter (B) after first 50 hours of operation, and
every 250 hours thereafter.
CA20 use filter part
#151975
CA25 with Bosch hydraulic block use filter part
#123989
CA25 with a Parker hydraulic block use filter part
#151975
Please Refer to Maintenance and Servicing Section of Operators Manual
C hange oil in
header drive
gearbox using
2.6 quarts (2.5
liters) or 85W -
140 (A P I
service class
G L-5) O il.
C hange oil in knife
drive gearbox(s)
using 2.3 quarts (2.2
liters) of 85W -140
(A P I service class
G L-5) oil.
Check and Adjust Tension on Gearbox Drive Chain
T he chain inside the gearbox has been tensioned at the factory and requires
no other m aintenance other than to adjust the tension every 500 hours or
annually. T o adjust chain tension follow these steps:
1.
Low er header, stop engine, and rem ove key.
2.
R em ove chain adjusting cover (A ). B e sure gasket (B ) is not
dam aged.
3.
R em ove retainer plate (C ).
4.
T ighten bolt (D ) to 60 in lbf (6.8 N m ) and then back off bolt
by 1 and 2/3 turns.
5.
R einstall retainer plate (C ).
6.
R einstall chain adjusting cover (A ) and gasket (B ). T orque
hardw are to 84 in lbf (9.5 N m ).
Please Refer to Maintenance and Servicing Section of Operators Manual
Summary of Contents for FD75
Page 1: ...Draper Clinic Handout...
Page 28: ...27 Brochure CCH 10 CA...
