MacDon D65, Installation Instructions Manual

Page: 66 / 74

169784
60
Revision H
The tow-bar consists of two sections which make storage and handling easier. Attach tow-bar to header as follows:
1017783
A
B
C D
Figure 3.96: Outer End of Header Section Attached to
Front Axle
1. Position outer end (A) of header section onto front wheel
hook (B).
2. Push down until latch (C) captures the end (A).
3. Secure latch (C) with clevis pin (D).
1011891
A
B
Figure 3.97: Tow-Bar Inner Ends
4. Remove the L-pin from inner end (B) of the header section
if installed.
5. Position inner end (A) of the towing vehicle section into
inner end (B) of the header section.
1011892
Figure 3.98: Tow-Bar Inner Ends
6. Lower towing vehicle section into header section.
INSTALLATION INSTRUCTIONS