MacDon D65, Installation Instructions Manual

Page: 41 / 74

169784
35
Revision H
1022943
D
B
A
C
Figure 3.45: Rear Fixed Axle
IMPORTANT:
To prevent equipment failure, tighten bolts to the specified
torque values.
13. Tighten carriage bolt (A) and torque to 203 Nm (150 lbf·ft).
14. Tighten the remaining three carriage bolts (B), (C), and (D),
and torque to 203 Nm (150 lbf·ft).
NOTE:
ONLY bolts (B), (C), and (D) can be torqued in any order.
1023413
A
B
Figure 3.46: Rear Fixed Axle
15. Tighten nut (A) on hex bolt (B) and torque to 217 Nm
(160 lbf·ft).
1023414
A
Figure 3.47: Rear Fixed Axle
16. Tighten nut (A) and torque to 244 Nm (180 lbf·ft).
INSTALLATION INSTRUCTIONS