Introduction
Safety chains have been added to driveline halves and guards sold by MacDon Parts. These parts can be used to replace
damaged driveline halves and guards on all MacDon CA20 and CA25 Combine Adapters and FM100 Float Modules. If
servicing a driveline not originally equipped with safety chains, the chain on the replacement part needs to be removed
first to prevent damage to the guard caused by only one half of the guard rotating during operation. This document
explains who needs to remove the chains, and how to install the replacement parts.
The kit should include one driveline half or guard, with attached safety chain, and a copy of this instruction.
Installation time
Installation time for this kit is approximately 30 minutes.
Conventions
The following conventions are used in this document:
•
Right and left are determined from the operator
’
s position. The front of the header is the side that faces the crop; the
back of the header is the side that connects to the combine.
•
Unless otherwise noted, use the standard torque values provided in the header operator
’
s manual and technical
manual.
NOTE:
Keep your MacDon publications up-to-date. The most current version of this instruction can be downloaded from our
Dealer-only site (
) (login required).
NOTE:
This document is currently available in English only.
214923
i
Revision A
