214923
7
Revision A
2.1.2
Removing Driveline
–
CA20 and CA25
WARNING
To avoid injury or death from unexpected start-up of machine, always stop engine and remove key from ignition before
leaving operator
’
s seat for any reason.
1001162
B
C
A
Figure 2.4: Adapter End of Driveline
1.
Remove the two nuts (A) securing the shield (B) to the
gearbox.
2.
Slide the shield (B) over the driveline shield to expose the
quick disconnect on the gearbox. Do
NOT
disconnect the
tether (C), if equipped.
3.
Pull the quick disconnect collar to release the driveline
yoke, and pull the driveline off the shaft.
4.
Slide the shield (B) off the driveline.
1001470
A
Figure 2.5: Combine End of Driveline
5.
Rotate the disc (A) on the adapter driveline storage hook,
and remove the driveline from the hook.
