214679
12
Revision B
Figure 3.15: Closing Driveline Shield
26.
Non-Grass Seed Headers only:
Lower shield (B).
27.
Non-Grass Seed Headers only:
Engage rubber
latch (A).
Figure 3.16: Closing Endshield
28. Grasp endshield at top, push slightly, and move
support (A) inboard to disengage.
29. Lower endshield to about 30 cm (1 ft.) from closed
position.
30. Release endshield so that it drops to closed position.
Shield will self-latch.
Figure 3.17: Reel Speed Harness Connection
31. Attach auger header to windrower if not already
attached. Refer to the windrower or header operator
’
s
manual for attaching header and connecting hydraulics
procedures.
32. Connect the variable reel speed harness to the top
electrical connector (A) under the left platform of the
windrower.
