![background image](http://html1.mh-extra.com/html/macdon/b6604/b6604_installation-instructions-manual_3192443014.webp)
214679
8
Revision B
Relocating knife guard straightening tool
Figure 3.3: Knife Guard Straightening Tool in
Storage Position (with Existing Bracket)
5.
Remove hair pin (A) securing knife guard straightening
tool (B) in its storage position, then remove tool (B).
Retain for reinstallation.
6.
Remove bolt and nut securing wrench support plate (C)
to the bar (D). Retain for reinstallation.
Figure 3.4: New Support Bracket
7.
Assemble wrench support plate (A), removed in Step
, to bracket (B) (MD #170974) using bolt (C)
(MD #21476) and nut (MD #18724).
8.
Install the assembled part to bar (D) using bolt (E) and
nut removed in Step
Figure 3.5: Knife Guard Straightening Tool in
Storage Position (New Bracket)
9.
Position knife guard straightening tool (A) as shown and
secure with hair pin (B).