215339
18
Revision A
1031527
A
B
Figure 3.26: Cutterbar Endplate
–
Bottom View, Left
End Shown, Right End is Opposite
20. Apply high-strength threadlocker (Loctite
®
262 or
equivalent) to two M16 bolts with two washers (A), and
install the hardware into the end of the cutterbar through
the slots on endplate (B). Torque bolts to 249 Nm
(184 lbf·ft). Repeat at the opposite side of the cutterbar.
1031522
A
B
Figure 3.27: Alignment Tool on Right Driven Drum,
Left Driven Drum is Opposite
21. Remove the four M12 bolts securing drive alignment
tool (A) to drive alignment adapter (B).
1031523
C
B
A
A
Figure 3.28: Alignment Tool on Right Driven Drum,
Left Driven Drum is Opposite
22. Remove four bolts (A) and drive alignment adapter (B).
23. Remove drive alignment tool (C).
