215339
7
Revision A
Chapter 3:
Installation Instructions
To install the Cutterbar kit (MD #338109), follow these steps and procedures in the order given.
3.1
Opening Cutterbar Curtain
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop the engine, remove the key,
and engage the windrower lift cylinder safety props before going under the machine for any reason.
1.
Raise the header fully.
1029808
A
Figure 3.1: Header Safety Prop
2.
Shut down the engine, and remove the key from the
ignition.
3.
Engage header safety prop (A). For instructions, refer to the
header operator
’
s manual or technical manual.
1028779
A
Figure 3.2: Cutterbar Curtain
4.
Push curtain (A) inward and up.
