23
MCSP40
by MacAllister
In
more
detail...
GB
IE
Product functions
NOTE:
When you squeeze the throttle interlock (26) and
throttle trigger (27) the choke knob (25) will return to the
operating position.
WARNING!
Allow the rope to return slowly and in a
controlled manner each time it is pulled!
If the engine is cold, pull out the choke knob (25) to the start
>
position (closed position) (Fig. 25). The throttle trigger will then
be set in the starting position. Press the primer (9) until the
bubble is completely filled with fuel (Fig. 26).
25
9
Fig. 25
Fig. 26
If the engine is warm, leave the choke knob (25) in its opened
>
position and do not prime.
Hold the product securely to the ground and put your foot on
>
the rear hand safeguard (10), then pull the starter handle (23),
vigorously 3 to 4 times. Do not start the engine while handling
the product with one hand (Fig. 27).
Fig. 27
When you hear several strokes (the engine has ignited), squeeze
>
the throttle interlock and throttle lever. Pull the starter handle
again until the engine starts.
MNL_MCSP40_DFT_GB_V06_111108.indd 23
11/8/11 11:10:47 AM
