MacAllister MCSP40 Get Started Download Page 59

Page: 59 / 62

MCSP40

by MacAllister

detail...

Technical and legal information

Prolonged use of this product expose the operator to vibrations

and may produce ‘whitefinger’ disease. In order to reduce the

risk, please wear gloves and keep your hands warm. If any of the

‘whitefinger’ symptoms appear, seek medical advice immediately.

‘Whitefinger’ symptoms include: numbness, loss of feeling,

tingling, pricking, pain, loss of strength, changes in skin colour

or condition. These symptoms normally appear in the fingers,

hands or wrists. The risk increases at low temperatures.

WARNING!

This product produces an electromagnetic

field during operation! This field may under some

circumstances interfere with active or passive medical

implants! To reduce the risk of serious or fatal injury, we

recommend persons with medical implants to consult

their doctor and the medical implant manufacturer before

operating this product!

MNL_MCSP40_DFT_GB_V06_111108.indd 59

11/8/11 11:10:58 AM

Summary of Contents for MCSP40































































Search results

Summary of Contents for MCSP40

Reviews:

Brands by name

Popular brands

MacAllister MCSP40, Get Started

Search results

Summary of Contents for MCSP40

Reviews:

Brands by name

Popular brands