06
MCSP40
by MacAllister
Getting
started...
GB
IE
Before you start
Assembly
Fold out the locking wheel (6) (Fig. 1).
>
Loosen the cover (8) by turning the locking wheel (6) anticlockwise
>
(Fig. 2) and remove it.
ST
A
R
T
ST
A
R
T
Fig. 1
Fig. 2
WARNING!
Always use a saw chain designed as “low-
kickback” or a saw chain which meets the low-kickback
requirements! A standard saw chain (a chain which does
not have the kickback reducing guard links) should only
be used by an experienced professional operator!
Nevertheless, a low-kickback saw chain does not
completely eliminated kickback! A low-kickback or “safety”
chain should never be regarded as complete protection
against injury! Therefore always use a low-kickback saw
chain in conjunction with other kickback protection devices
such as the front guard/chain brake!
WARNING!
Before removing, ensure the front guard/
chain brake (2) is in the disengaged position (see section
“In more Detail - Chain brake”). If in the engaged position,
pull the front guard/chain brake backwards until it ‘clicks’
into position.
Chain and guide bar
Use only the guide bar (4) and saw chain (3) according to the
>
technical data of the product.
Place the product on a suitable flat surface with the cover (8)
>
facing upwards.
MNL_MCSP40_DFT_GB_V06_111108.indd 6
11/8/11 11:10:39 AM
