Macab DCB-101, User Manual

Page: 20 / 32

20
USER MANUAL DCB-101
SECTION 7
CONFIRM
OK
UP TO DATE OF DECODER
UP TO DATE COMPLETED
THE UP TO DATE OF YOUR DECODER
WAS SUCCESSFUL
TO RETURN TO YOUR PROGRAMME
PRESS OK
Installing the digital-TV-box
In order to improve the functions and services offered, your digital-box may
be updated directly via the cable-TV-network. The digital-box may only be
updated when it is switched on (not in stand-by). Do not turn off the digi-
tal-box during updating.
When new software is available for updating your box, this is normally
presented to you when the digital-box is started from stand-by to on position.
It is therefore recommended that you once in a while turn the box off (stand-
by) and then on again to check if there is any update available.
UPDATE THE BOX
As soon as new functions and services become available, an on screen
message will be displayed which offers you to complete the update.
You can accept by pressing
OK
or ….
…. postpone the update by pressing
QUIT
. If you select to postpone, the
update message will appear each time you start the box from stand-by.
UP TO DATE OF DECODER
IN ORDER TO IMPROVE
THE DECODER OPERATION
A SOFTWARE UP TO DATE IS NECESSARY.
IT TAKES A FEW MINUTES.
DURING THE UP TO DATE
YOUR SCREEN WILL BE BLACK.
DO NOT TURN OFF YOUR DECODER
DURING THIS TIME.
TO RECEIVE THIS UP TO DATE
PRESS OK OTHERWISE Q TO EXIT
CONFIRM QUIT
Q
OK
OBSERVE!
There are no costs or obligations involved in doing an update.
This is a free service to improve the functionality of your digital-
box.
Do not touch any keys or try to turn the digital-box off during the
update. The screen will be black during the update but the front-panel
display will keep you informed about the progress. If anything should
go wrong during the process an error message will be displayed. Se page
27–28.
A new screen message will inform you that the update was completed
successfully.
Press
OK
to return to normal use.