12
Viewing card
To install the digital-box and to be able to view encrypted
programmes a valid viewing card “smart card” is required.
Place the card in the designated card reader. Always leave
your card in the card reader to avoid that it gets lost or
damaged and so that it continuously can be updated.
To place the card: open the lid on the left-hand side of the
front panel. Carefully push the card into the card reader
slot. The arrow and the gold coloured contact pad are faced
upwards and inwards when the viewing card is placed in
the slot. The viewing card is placed in the left-hand slot
(CARD A). The right hand slot (CARD B) is aimed for
coming services such as cash money cards etc.
ON SCREEN MESSAGES
When starting the digital-box from standby, initially a start
up picture is displayed showing an hour-glass or similar. At
the same time the message “init” is shown on the front
panel display. This to indicate that the digital-box is busy
connecting to the cable-TV network and downloading
necessary data to its internal memory.
If anything goes wrong, one of the three messages on the
right may come up.
WARNING
Never extract and insert your card unnecessarily.
Do not bend the card.
Do not clean the card with liquid of any kind.
INDSÆT DERES KORT
I TV-BOKSEN.
IN CASE OF PROBLEM
PLEASE CONTACT YOUR RETAILER
PLEASE INSERT YOUR SMART CARD
IN THE DIGITAL DECODER
INVALID SMART CARD
CHECK IF IT IS
INSERTED CORRECTLY
IN CASE OF PROBLEM
PLEASE CONTACT YOUR RETAILER
THIS CHANNEL IS NOT INCLUDED
IN YOUR SUBSCRIPTION
TO SUBSCRIBE
PLEASE CONTACT YOUR RETAILER
020
M050Fh
M053Fh
M051Fh
M052Fh
Development and design of basic software and menus are made by Sagem SA
USER MANUAL DCB-101
SECTION 6
Summary of Contents for DCB-101
Page 2: ...2...
