Trigger
Handle
Adjustment
Nut
Instruction Manual
MAN-027
39
www.macmedical.com
Safe Use of the Water Gun
1. Prior to operation, make sure all tip attachments
are properly seated on the safety cone by firmly
pushing them all the way down on the gun tip.
2.
CAUTION:
Maximum water pressure
allowed for use with this equipment is
86 PSI (6 bar).
3.
Make sure supply valve (attaching the Water
Gun to the supply) is open.
4.
CAUTION:
Do not point the Water Gun
toward the body. The highly compressed
water or air output can cause severe injury to
exposed flesh.
5.
CAUTION:
Wear appropriate Personal
Protection Equipment (PPE). Due to
potential splashes of contaminated fluids, it
is recommended that a full face shield and
protective gloves be worn during operation.
6.
If required, the maximum water or air pressure
can be adjusted by turning the small threaded
adjustment nut located behind the trigger
handle. (See second picture - right.)
7. The flow is controlled by pulling the Trigger
Handle up to the maximum set point fixed by
the threaded adjustment nut. (See second
picture - right.)
8.
CAUTION:
Shut-off valve should be turned
off when not in use.
9.
CAUTION:
The Water Gun is
NOT
a medical
instrument and is therefore
NOT
for use as part
of medical treatments.
Insert Tip
Safety Cone
