40
41
MLMP300H40
MLMP300H40
In
more
detail
. . .
In
more
detail
. . .
6. We recommend using the original package for storage or covering the product
with a suitable cover or enclosure to protect it against dust.
7. For long-term storage (more than 5 days), drain the fuel tank as described in
operator’s manual of the BRIGGS&STRATTON engine (28).
Transportation
1. Stop the engine and disconnect the spark plug connector (13).
2. Adjust the height to the highest position as described in the “Cutting height
adjustment” section.
3. Attach transportation guards, if applicable.
4. Always move the product by the handle (1).
5. If a suitable loading ramp is not available, ask another person for assistance when
loading the product on a vehicle.
6. Protect the product from any heavy impacts or strong vibrations which may occur
during transportation in vehicles.
7. Secure the product with tie-down straps to prevent it from slipping or falling over.
Troubleshooting
Therefore, check the product using this section. In most cases, the problem can be
solved quickly.
WARNING!
Only perform the steps described in these instructions! All further
inspection, maintenance and repair work must be performed by an authorised
yourself!
Spare parts
The parts mentioned in the maintenance table may be replaced by the consumer.
Spare parts are available at an authorised dealer or through our customer service.
Description
Blade
DAYE 2105200264
Engine maintenance
Refer to the operator’s manual of the BRIGGS&STRATTON engine (28) for maintaining
below parts:
>
>
Engine oil
>
Valve play
>
Spark plug
>
Carburettor
>
>
Fuel
Repair and service
This product does not contain any parts that can be repaired by the consumer. Contact
repaired.
Only an Authorized Briggs & Stratton dealer can perform warranty repairs on the
Briggs&Stratton engine.
Use the Parts & Repair Dealer Locator on BRIGGSandSTRATTON.com to locate an
engine dealer nearest you.
For service of the product outside of the engine, contact Sertronics by helpline
0800 4840045 or Email: [email protected].
Storage
NOTE:
Good storage conditions are important for keeping your product
trouble-free.
1. Stop the engine and disconnect the spark plug connector (13).
2. Clean the product as described in the “Cleaning” section.
3. Loosen the side levers (6). Unlock the lower handle bar lock (18) and fold
the lower (4) and the upper handle bar (3).
4. Store the product and its accessories in a well-ventilated dry storage area.
5. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
Care and maintenance / Troubleshooting
Care and maintenance
