28
29
MLMP300H40
MLMP300H40
In
more
detail
. . .
In
more
detail
. . .
Cutting height adjustment
WARNING!
Before adjusting the cutting height, stop the engine and
wait until the blade (24) comes to a complete stop.
This product can be adjusted to 7 different height settings. New or thick grass may
require a higher cutting height and a narrower cutting path.
1. Pull the lever for cutting height adjustment (17) towards the wheel (14) (Fig. 19, step 1),
and then move it forward or backward to the desired cutting height (Fig. 19, step 2).
2. Release the lever (17) and ensure it engages into place properly.
NOTE:
If you are not sure what cutting height should be selected, start with
a maximum height and check the appearance of the lawn after mowing a
small area. Adjust the setting if necessary.
19
1
2
17
WARNING!
Ensure that the lever (17) engages between two of the grooves!
1.
19) and hold it in place.
2. Lift the grass catcher hooks off the rods and place the grass catcher (20) on the
ground.
3. Remove the grass clippings from the rear discharge chute (25) into the grass
catcher (20). Use a proper tool such as a brush.
WARNING!
Never use your hands or feet to remove grass clippings from
the rear discharge chute (25)!
4. Empty the grass clippings onto a compost heap.
5.
Grass catcher inspection
During use the grass catcher (20) material is subjected to normal wear and tear.
An excessively worn grass catcher may allow the objects to be thrown towards the
operator. Replace a worn grass catcher to prevent possible injury.
Mulching insert
NOTE:
Mulching means cutting and returning the grass clippings to the
evenly back onto the lawn. Under normal conditions, the mulched grass will
biodegrade quickly to provide nutrients to the lawn.
1.
insert (26) into the rear discharge chute (25) (Fig. 17). Ensure the unlock button
(26a) snaps in place.
2. Press the unlock button (26a) to release and remove the mulching insert (26) (Fig. 18).
17
18
26
19
26a
1
2
1
2
25
Product functions
Product functions
