EN
24
In
more
detail...
MLM1737
by MacAllister
1. Open the deflector guard (15), hold the handle (19a) in position and insert the
mulching insert (19) into the rear discharge chute (18) (Fig. 15). Ensure the
spigots (19b) snap into the rear discharge chute slots (18b).
2. Lift the handle (19a) to disengage the mulching insert (19) from the rear
discharge chute slots (18b), then remove the mulching insert (19) (Fig. 16).
1. Check the product, its power cord as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear. Take care
of any problem you find or have the product checked by qualified specialist.
2. Double check that accessories or attachments are properly fixed.
3. Always push the product using the grip handle (1). Keep the handles dry to
ensure safe support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
Product functions / Operation
Mulching insert
General operation
NOTE:
Mulching means cutting and returning the grass clippings to
the lawn in one step: the grass clippings are cut very fine and then
distributed evenly back onto the lawn. Under normal conditions, the
mulched grass will biodegrade quickly to provide nutrients to the lawn.
Do not attach the grass catcher (8) and the mulching insert (19) at the
same time.
The mulching insert prevents grass from being collected by blocking the rear
discharge chute (18).
This allows the grass clippings to be deposited back on the lawn during cutting.
15
18
18b
19
19a
1.
2.
Fig. 15
15
19a
19
1.
2.
Fig. 16
