EN
14
Getting
started...
MLM1737
by MacAllister
NOTE:
For first assembly, secure the lower handle bar (7) with the
clamp levers (6) in the middle position of the tilt adjustment mechanism
by aligning the indication line (7a) with the indicator (9a) of the transport
handle (9). Ensure the lower handle bar (7) are assembled on the same
height level on both side.
Handle assembly
The lower handle bars (7) are pre-installed on the transport handle (9).
1. Unfold and loosen the clamp levers (6) anti-clockwise on the lower handle
bar (7), but do not remove them (Fig.1, step 1).
2. Grasp the lower handle bar (7) and unfold it from storage position to work
position (Fig. 1, step 2).
3. Secure the lower handle bar (7) by folding up the clamp levers (6) towards
the lower handle bar (7). If the clamp lever (6) cannot be folded, loosen
it and fold again. If it is too loose, tighten it by turning the clamp lever (6)
clockwise (Fig. 2)
Before you start
Assembly
NOTE:
Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
WARNING!
The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
9
1.
1.
2.
6
6
7
Fig. 1
9a
7
9
7a
6
6
Fig. 2
