EN
27
In
more
detail...
MGT35025
by MacAllister
Care and maintenance
Spare parts/Replacement parts
10. Refit the cover (10a) and make sure it snaps into place.
Refill the trimming line in the trimming spool
1. Remove the trimming spool (10c) from the housing (10e) as instructed in
chapter “Trimming line - Replace the trimming spool”.
2. Discard all the remaining lines (10d) from the trimming spool (10c).
3. Clean the housing (10e) and the trimming spool (10c).
4. Cut two new 2 m long trimming lines with a diameter of 1.4 mm.
5. Lead one end of the new trimming lines (10d) through the small eyelet on the
trimming spool (10c) in direction of the arrows (Fig. 19).
6. Insert two trimming lines (10d) all the way until the end then bend them over.
7. Wind all the trimming lines firmly around the trimming spool (10c) in direction
of the arrows on the trimming spool (10c) (Fig. 20).
10a
10c
10g
10d
10e
10c
10d
2.
3.
1.
Fig. 18
10c
10d
Fig. 19
Fig. 20
Spare parts are available at an authorised dealer or through our customer service.
Summary of Contents for MGT35025
Page 36: ......
