EN
22
In
more
detail...
MGT35025
by MacAllister
6. Ensure the cutting device remains clean and free from off-cuts that may
cause it to jam. Check regularly. Release the on/off switch (2) and disconnect
the product from the power supply before checking.
7. Trim longer grass in stages; do not cut long grass in one cut (Fig. 11). For the
best results, cut longer grass in steps (Fig. 12).
1. For best results, do not cut wet grass because it tends to stick to the cutting
head and guard, prevents proper discharge of grass trimmings, and could
cause you to slip and fall.
2. Do not allow the spool cover to drag on the ground or other surfaces.
3. Pay special attention when performing the work close to trees and bushes.
The cutting head could damage sensitive bark, and damage fence posts.
4. Rotate the plant protector (11) to trimming position to avoid bringing the
cutting device into contact with hard objects such as walls and kerbstones
(Figs. 13, 14).
Operation
Trimming
Tips
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Summary of Contents for MGT35025
Page 36: ......
