EN
EN
8
9
Getting started...
Getting started...
MPS750S-2
MPS750S-2
product may result in serious personal injury.
3. Hold the product by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring or its own cord.
Saw
chains contacting a “live” wire may make exposed
metal parts of the product “live” and could give the
operator an electric shock.
4. Keep cable away from cutting area.
During
operation the cable may be hidden in shrubs and
can be accidentally cut by the blade.
5. Keep all parts of the body away from the saw
chain when the product is operating. Before you
start the product, make sure the saw chain is
not contacting anything.
A moment of inattention
while operating products may cause entanglement
of your clothing or body with the saw chain.
6. Always hold the product with both hands on the
handle and soft grip.
Holding the product with only
one hand or on parts not intended for that increases
the risk of personal injury and should never be
done.
7. Wear safety glasses and hearing protection.
Further protective equipment for head, hands,
legs and feet is recommended.
Adequate
protective clothing will reduce personal injury by
flying debris or accidental contact with the saw
chain.
8. Do not operate a product in a tree.
Operation of
a product while up in a tree may result in personal
injury.
Technical and legal
information
Technical and legal
information
9. Always keep proper footing and operate the
product only when standing on fixed, secure and
level surface.
Slippery or unstable surfaces such as
ladders may cause a loss of balance or control of the
product.
10. When cutting a limb that is under tension be alert
for spring back.
When the tension in the wood fibres
is released the spring loaded limb may strike the
operator and/or throw the product out of control.
11. Use extreme caution when cutting brush and
saplings.
The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
12. Carry the product by the soft grip with the
product switched off and away from your body.
When transporting or storing the product always
fit the guide bar cover.
Proper handling of the
product will reduce the likelihood of accidental contact
with the moving saw chain.
13. Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
14. Keep handles dry, clean, and free from oil and
grease.
Greasy, oily handles are slippery causing
loss of control.
15. Cut wood only. Do not use product for purposes
not intended. For example: do not use product
for cutting plastic, masonry or non-wood building
materials.
Use of the product for operations different
