50
51
MPS750S-2
MPS750S-2
In more detail...
In more detail...
EN
EN
9. Use a depth gauge measuring instrument to check the height of the
depth gauge. Depth gauge measuring jigs are available from most
reputable tool merchants (Fig. 43).
Fig. 43
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer.
Spare parts are available at an authorised dealer or through our
customer service.
Description Model no. or Specification
Saw chain Oregon 91PJ033X
Guide bar
Oregon 546649
Power cord
1. If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a safety hazard.
Plug replacement (for UK only)
If you need to replace the fitted plug, then follow the instructions
below.
IMPORTANT: The wires in the mains lead are coloured in accordance
with the following code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows. The wire, which is coloured blue, must be
connected to the terminal, which is marked with N or coloured black.
The wire, which is coloured brown, must be connected to the terminal,
which is marked L or coloured red.
WARNING! Never connect live or neutral wires to the
earth terminal of the plug.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the
correctly rated fuse.
If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
Connect Blue to N
(Neutral)
Outer sleeve firmly
clamped
Cable grip
Brown L (Live)
13AMP fuse
approved to BS 1362
Care and maintenance
Care and maintenance
