18
2. Remove the corrugated hose. Disassemble the upper part of the
corrugated hose which is located inside the overflow filter.
3. Clean the lint around the filter and rinse it under running water.
4. Reinstall the overflow filter:
a. Replace the corrugated hose.
b. Insert the mounting plate at the bottom of the filter in the
valve cover.
c. Replace the hook on the upper left side.
d. Push in the upper portion.
maintenance of the unit
•
Clean the entire unit with a slightly damped soft cloth.
•
Clean the washer with a mild detergent if it is very dirty.
•
Do Not wash the appliance using water.
•
After washing, remove the water inlet hose.
•
Do not store water in the tub for prolonged periods of time.
Empty the tub after each use.
•
Disconnect the plug from the power supply and hang power cord.
•
Hang the drain hose. Wipe dry drops of water from the exterior
surface of the machine and from the inside of the tub with a
clean, soft cloth.
•
Open the lid of the wash tub, the internal and external covers
from the spin tub for about an hour, then close them.