54
2.3 Installing the backguard (see features by model chart
at end of the manual).
1
2
3
4
5
6
Unpack the backguard located
at the top of the range.
Place the backguard on the
cooktop and make sure that the
holes of both pieces match, so
the backguard is correctly seated
(see picture 1).
Place the 2 round head screws at
the lower face of both, back-
guard and cooktop, firmly
tighten with the nuts (see
picture 1). Use pliers.
Place the metallic reinforcements
in position (see picture 2) and
slide them to their final location.
Place 1 Phillips head screw on
each support, at the top of the
backguard (see picture 2).
Place 2 round head screws on
each support, at the lower face
of backguard and cooktop (see
picture 2), firmly tighten with
the nuts. Use pliers.
Picture 1
Picture 1
2.4 Connecting the gas supply
DO NOT USE PLASTIC HOSES TO CONNECT THE GAS
SUPPLY AS THEY COULD LEAK, EVEN BRAIDED FLEXIBLE
STEEL HOSES.
Make sure your home has a gas pressure regulator that provides the correct
pressure.
