67
To turn on the manual ignition oven.
(See features by model chart, at the end of the manual.)
Figure 1
Make sure that the oven
knob is in the off position.
1
2
3
4
5
6
7
8
9
Push in and turn the knob to
the 260 °C setting
Before removing the flame,
wait until the burner turns
on and make sure that
flames are blue by looking
through the hole on the
oven floor.
Turn the knob to the desired
setting.
If the burner does not ignite,
turn the knob back to the off
position and repeat the
procedure from step 4.
Open the oven door.
Locate the burner ignition
hole (see attached illustra-
tion).
Light a long kitchen lighter
or match.
Immediately after, approach
the flame to the burner
ignition hole.
