mabe GSS21 Series, Service Manual

Page: 24 / 65

- 22 -
4. With a small flat-blade screwdriver, unhook the locking
lugs from the cover of the upper hinge and remove it.
5. Remove the screws (2) Torx head from the hinge and
lift the upper hinge of the unit
CAUTION: Do not load the hinges aside.
CAUTION:
Only the freezer door - Do not allow the connector
to make contact with the floor. A hard contact can damage the
connector.
NOTE: Guide the water line and wire harness through the
hinge while lifting the hinge door.
1.
Open the door 90 ° and lift it straight up and out of
the lower hinge
Manguito
Pasador Bisagra
Tornillo Torx
GEA00908
4. Remove the screws (3) Torx and the
lower hinge of the cabinet
Manguito
Bisagra
Ajuste Pasador
Bisagra
Tornillo Torx
Lower Hinge, Side of the Cooler
Cooler door adjustment
IMPORTANT: The freezer door is not adjustable. The
cooler door can be adjusted to match the height of the
freezer door.
IMPORTANT:
The refrigerator rollers must be correctly
adjusted to ensure an adequate closing of the door. For
more information see the Roller Adjustment section in
this chapter.
1. Remove the grid from the base.
2. Turn the hinge adjustment pin (located on the bottom
hinge of the cooler) clockwise to raise the door level and
counter- clockwise to lower the door.
Rollers
The unit has 4 rollers for easy movement of the
refrigerator. There are 2 rollers located on the front and
2 rollers located on the back of the unit.
IMPORTANT: The rollers of the refrigerator must be
adjusted correctly to ensure an adequate closing of the
door. See Roller Adjustment.
1. To remove the front rollers, reverse the level
adjustment screw completely.
2. Remove the 1/4 "roller mounting bolts and remove the
mold.
GEA00945
3. To remove the rear screws, remove the 1/4 "mounting
screws (2).
4. Tilt the roller down and slide it out.
Tornillos