22
Owner’s Manual
E
nglish
The 300 Control System offers you simplicity in
spa control. The backlit, Liquid Crystal Display
(LCD) displays current temperature, set water
temperature, and operating mode settings.
Each feature is actuated through the control
panel pad.
Touch the appropriate button to activate
the desired function.
At start up, when power is supplied to the spa,
the controls will operate properly and safely
under the factory settings. The spa will be in
Standard
mode, have a temperature setting of
100°F (38°C), and a filtration cycle duration of
1 hour. To fully utilize the unique capabilities
of the control system, it is important to know
how to set the temperature, operate the
pumps, operate the light, adjust the mode
setting, and change the filtration cycle.
Note: In event of a power outage or failure,
the 300 Series Control System may retain
settings. If settings are lost, re-program per
the instructions in this manual.
User’s Pads
User’s Pads are the buttons located on the
topside control panel and are used to program
various spa functions (i.e., turn on spa light, set
temperature, etc.). The following table defines
the buttons:
Your Topside Control looks like
this, your spa has the following
features:
• Internal Light
• 1 Dual Speed Pump
Pad
Use
• Decrease temperature
• Increase temperature
• Switch modes
• Change filer cycle durations
• Turn internal spa light on or off
• Switch modes
• Activate therapy pump
• Set duration of filter cycles
300 CONTROL PANEL
NOTE: The look of your topside control panel design and buttons will vary according to brand.
See table below for pictures and explanation of 300 Control Panel button functions.
