security system is equipped with an optional Passive Arming feature which allows the security
system to arm 30 seconds after the ignition switch is turned off. Operation is as follows:
1. Turn the ignition to the “OFF” position.
2. The security system LED will flash quickly for 30 seconds. Each time a sensor is triggered
during the passive arming countdown, the 30-second countdown starts over.
3. After the 30-second timer has elapsed, the security system will automatically “ARM”. The siren
will chirp [1] time and the parking lights will flash [1] time.
PASSIVE ARMING BY-PASS:
While the system is disarmed, press
III
button twice within 3
seconds, the security will respond with [1] chirp and LED will turn “ON”. The security system will
remain in this temporary state for as long as you with. To exit passive by-pass, press
II
button or
II
button and the system will return to normal status.
I. ACTIVE DISARMING
1. Press
II
button on the transmitter.
2. The siren will chirp twice and the parking lights will flash twice indicating that the
security system is now disarmed.
Activated on the
Shock
Sensor
Activated on the
Ignition Switch
Activated on
the Close Loop
Activated on
the Tilt Sensor
(Optional)
System Disarm
Clearing the Flashing Icons:
Pressing SET button 3 times within 3 seconds will clear the
flashing icons on the LCD screen transceiver.
SILENT DISARMING:
Press
III
button first, within 3 seconds, press
II
button to silently disarm
your security system. No chirp sound will be heard. Disarm confirmation will be through the
motorcycles parking lights only.
TAMPER DISARMING:
If alarm has been triggered. Upon disarming the system the siren will
chirp 4 times and the parking lights will flash 3 times.
DISARMING WITH PATHWAY ILLUMINATION:
Press
II
button once to disarm the system, the
siren will chirp twice. Within 3 seconds, press
F
button. The parking lights will be turned “ON” for
30 seconds to illuminate your pathway.
AUTOMATIC RE-ARM:
If this feature is selected, the security system will automatically re-arm
itself 60 seconds after disarming with remote transmitter. Pressing
III
button twice within 3
seconds or turning on the ignition switch will cancel the rearm.
J. DISARMING WITHOUT A TRANSMITTER
OVERRIDE THE ALARM WITHOUT PASSWORD PIN CODE:
(Factory Default Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1. Turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 10 seconds push and release the valet switch.
The alarm will stop sounding and will enter the disarm mode. You can now start and operate
the motorcycle normally.
OVERRIDE THE ALARM WITH PASSWORD PIN CODE:
Since the valet switch can be easily found and defeated, this security system allows the
consumer to program a password pin code offering a higher level of security.
6
