14
www.massportal.com
Layer height:
the height of each layer for the 3D printed object, it should be between 0.05-0.3 mm;
First layer height:
height of the first layer – set it to at least 0.2 mm to get better grip to the printing
surface;
Perimeters (minimum):
how many lines should be made at the 3D object’s perimeter making a shell.
Usually 2-3 is enough;
Solid layers:
number of solid layers at the top and bottom of the object. If set to 0 layers will be empty.
Usually 2 - 3 at 0.2 – 0.3 mm layer height, for 0.05 – 0.1 mm layer height use ca. 6 - 8;
Avoid crossing perimeters:
Optimizes printing path to almost avoid crossing the perimeter. Usually not
used as it prolongs the printing and G-Code generation time.
Randomize starting points:
select to have the starting point of each layer at a different place instead of
one;
External perimeters first:
usually not used;
Create and save many profiles
