M86 Security Threat Analysis Reporter, User Manual

Page: 50 / 192

P
RELIMINARY
S
ETUP
S
ECTION
C
HAPTER
2: A
DMIN
G
ROUPS
S
ETUP
40
M86 S
ECURITY
U
SER
G
UIDE
• Optional: Type in the group administrator’s Home
Phone number without entering any special charac-
ters.
• Type in the group administrator’s Email address.
• Optional: Type in identifying information about the
group administrator’s physical office Location .
• Optional: If the administrator has an Active Directory
LDAP account, user name, and domain, type in the
alphanumeric group administrator’s
LDAP User Name
exactly as set up on the Active Directory domain in
which he/she is registered.
• Optional: If an entry was made in the LDAP User
Name field, type in the exact characters for the LDAP
Active Directory
Domain name in which the group
administrator is registered.
NOTE : If the group administrator will be using the System Tray
feature—that triggers an alert in his/her System Tray if an end
user’s Internet usage has reached the upper threshold estab-
lished for a gauge’s alert—the LDAP User Name and Domain
entered in these fields should be the same as the login ID and
password the group administrator uses to authenticate on his/her
workstation. (See Configuration Section, Chapter 3: Alerts,
Lockout Management and Appendix B: System Tray Alerts:
Setup, Usage for details on setting up and using the System Tray
feature.)
• Type in the TAR Login ID the group administrator will
use to access the TAR user interface. This entry will
display in the Admin Names list when the record is
saved.
• Type in the Password the group administrator will use
in conjunction with the TAR Login ID, and enter that
same password again in the
Confirm Password field.
These entries display as asterisks for security
purposes.
• Optional: Type in any Comments to be associated
with the group administrator’s account.