manualshive.com logo in svg

M86 Security Threat Analysis Reporter, User Manual

Share
Download
M86 Security Threat Analysis Reporter User Manual Download Page 180

A

PPENDICES

 S

ECTION

    

A

PPENDIX

 C

170

M86 S

ECURITY

 U

SER

 G

UIDE

Step 4: Rebuild the hard drive

A. Once the failed hard drive has been replaced, return to 

the Hardware Detector panel in the Administrator 
console, and click 

Rebuild Now

 to open the Results alert 

box:

Fig. C-2  Hardware Detector panel, initiate Rebuild process

The Results alert box displays the following messages if 
the RAID rebuild proceeds as expected: “RAID rebuild 
process starting. Rebuild has completed successfully. It 
will take approximately two hours for the RAID array to 
finish reconstruction.”

B. Click 

OK

 to close the Results alert box and to continue 

with the RAID array reconstruction process.

WARNING

: When the RAID array reconstruction process begins, 

the Administrator console will close and the hard drive will 
become inaccessible.

Summary of Contents for Threat Analysis Reporter

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands