I
NSTALL
THE
S
ERVER
S
TEP
1A: Q
UICK
S
TART
S
ETUP
P
ROCEDURES
26
M86 S
ECURITY
I
NSTALLATION
G
UIDE
System Status screen
The System Status screen contains the following information:
•
Operation Mode
for the Web FIlter specified in screen 3 (Change filtering
mode)
•
Capturing Interface
specified in screen 4 or 5 (Configure network interface
LAN1 or LAN2)
•
Management and Blocking Interface
specified in screen 4 or 5 (Configure
network interface LAN1 or LAN2)
•
lan1 IP
address and netmask specified in screen 4, and current status (“Active”
or “Inactive”)
•
lan2 IP
address and netmask specified in screen 5, and current status (“Active”
or “Inactive”)
•
Default gateway
IP address specified in screen 6 (Configure default gateway)
•
host name
for the Web Filter specified in screen 8 (Configure host name)
•
DNS server IP address(es)
specified in screen 7 (Configure DNS servers)
•
Regional timezone setting
specified in screen 9 (Time Zone regional setting)
• Current status of the Web Filter
• Current Web Filter software
Version
installed
• Library update status
• Current status of the Enterprise Reporter and Threat Analysis Reporter applica-
tions
NOTE
: Modifications can be made at any time by returning to the specific screen of the
Quick Start procedures.
Log Off, Disconnect the Peripherals
A. After completing the Quick Start setup procedures, return to the Quick Start
menu screen and press
9
to log out.
B. Disconnect the peripherals from the WFR.
Proceed to Step 2: Physically Connect the Unit to the Network.
Summary of Contents for 350
Page 8: ...CONTENTS viii M86 SECURITY INSTALLATION GUIDE...
Page 124: ...INDEX 116 M86 SECURITY INSTALLATION GUIDE...
Page 125: ......
