M86 Security 350, Installation Manual

Page: 33 / 126

I
NSTALL THE
S
ERVER
S
TEP
1A: Q
UICK
S
TART
S
ETUP
P
ROCEDURES
M86 S
ECURITY
I
NSTALLATION
G
UIDE
25
Non-Quick Start procedures or settings
The options described below do not pertain to the quick start setup process.
Reboot system
A. From the Quick Start menu, press B to go to the Reboot confirmation screen.
B. At the Really reboot the system? prompt, press Y to continue, or press any
other key to cancel reboot.
Change Quick Start password
A. From the Quick Start menu, press C to go to the Change Administrator Pass-
word screen.
NOTE : This option will change the password used for accessing the Quick Start menu (the
default password being #s3tup#r3k ) but will not change the password used for accessing
the ER console login screen. Option D, “Reset admin console account”, should be used
for resetting the Web Filter Administrator console username and password to the factory
default ‘admin’/’user3’ and for unlocking all IP addresses currently locked.
B. At the Enter the new administrator password prompt, type in the new pass-
word to be used for accessing the Quick Start menu and press Enter .
C. At the Re-enter the new administrator password prompt, re-type the pass-
word you just entered and press Enter , or press Esc to cancel the change.
Reset admin console account
A. From the Quick Start menu, press D to go to the Reset admin GUI account
confirmation screen that displays the following message:
Reset admin account password? Are you sure?
NOTE: This process will also unlock the admin account and unlock all currently
locked IPs.
NOTE : This option resets the Web Filter Administrator console username and password to
the factory default ‘admin’/’user3’ and will unlock all IP addresses currently locked.
B. Press Y to continue, or press any other key to cancel admin account reset.