Ring Scanner User Manual
Wired type Ring Scanner
Copyright © 2000-2020 M3Mobile Co., Ltd. All rights reserved. M3Mobile Co., Ltd. is the designer and manufacturer of M3Mobile handheld
mobiles. Features and specifications are subject to change without prior notice. All other trademarks are the property of their respective owners.
13
2.2
Simple operate user manual
The wired one barcode reader is much easier than that of wireless(BT) one
:
1: Insert the scanner's Type-C interface into the wearable sled as shown in the
picture below.
2: After connecting the wearable sled to the scanner, press the right button of
the scanner to emit the scanner startup sound.
3: Open the place where the barcode needs to be entered on the mobile device.
4: Scan the barcode, and the scanned data will be scanned on the mobile device.
(The scanner will vibrate and the buzzer will sound once, and the green
indicator light on the top of the scanner will blink once, indicating that the
barcode scanning was successful.
)
QD Connector
Ring Scanner
Wearable Sled
Device
Type-C
Summary of Contents for Wearable Ring Scanner
Page 1: ......