background image

6

5

8

1

2

3

7

12

20

18

23

19

16

21

17

22

4

13

14

11

15

9

10

Notifications

Charging\Notification LED:

Data Capture LED:

Slow blinking amber: Battery charging
Solid green: Fully charged
Fast blinking amber: Charging error
Slow blinking red: Charging aged battery
Solid red: Fully charged aged battery
Fast blinking red: Charging error aged battery
Slow blinking blue: Application notification

Green: Good Decode

Data Capture

Charging/Notification

Note: 

Remove protective shipping film that covers the touch screen, exit 

window and camera window before using.

FEATURES

CARD INSTALLATION

MicroSD Card Installation (Optional)

TC70

QUICK START 

GUIDE

PTT Button (programmable)

Scan Button

Back Button

Home Button

5

 

Power Input

Search Button

Menu Button

Touch Screen

Light Sensor

10 

Proximity Sensor

11 

Power Button

12 

Receiver

13 

Charging/Notification LED

14 

Data Capture LED

15 

Front-facing Camera

16 

Hand Strap Mounting Point

17 

Camera Flash

18 

Rear-facing Camera

19 

Interface Connector

20 

Exit Window

21 

Volume Button

22 

Battery Release Latch

23 

Hand Strap

Note 1:  

To reset the TC70, press and hold the Power button until the menu 

appears and then select 

Reset

HANDSTRAP AND BATTERY INSTALLATION

BATTERY INSTALLATION

Red: Data capture in process

1.

 

Remove hand strap filler plate.

2

3

4

BATTERY INSTALLATION

1.

 

Insert the bottom of the battery into the battery compartment.

1.

 

Lift the access door.

2.

 

Insert the microSD card into the card holder. Push the card all the way into the 
card holder.

NOTE :

Proper position of the microSD card — the card connector (i.e., gold contacts) should 
be facing down.

3. 

Replace the access door. Ensure that it is properly seated.

4.

  Rotate the battery down into the battery compartment and press the battery 

down until it snaps into position.

2.

 

Insert the hand strap plate into the handstrap slot.

3.

 

Insert the bottom of the battery into the battery compartment.

5.

  Place the hand strap clip into the hand strap attachment slot and pull down to lock into 

place.

2.

 

Rotate the battery down into the battery compartment.

3.

 

Press the battery down until it snaps into position.

Blue: Application notification

6.

  Lift the hand strap ribbon off the hook material.

7.

  Slide the pad and adjust the ribbon for best fit.

8.

  Press the ribbon down to secure to hand strap.

Reviews: