07
08
DATA CAPTURE
Scanning
▪ Launch the Scanner program (either ScanEmul or M3ScanTest).
▪ Press the SCAN BUTTON toward barcode to read.
Imaging
▪
Launch the Scanner program.
▪
Press the SCAN BUTTON toward barcode to read.
Make sure the laser beam covered whole barcode to read data properly.
Make sure the laser beam covered whole barcode to read data properly.
SCANNER
How to charge
▪ Supply power to the cradle using the AC
charger.
▪ Insert the PDA to device slot to start
charging the PDA.
Charging status
Charging status of the PDA and the spare
battery is indicated by LEDs.
LED charging indicator on the cradle
indicates the charging status of the spare
battery.
LED on upper left corner in the middle of
the device indicates the charging status of
the battery attached to the PDA.
CHARGING
Insert chaging adapter
Power port
DEVICE SETUP
Battery attached to the PDA
LED color
Spare battery
The battery is being
charged.
RED
The spare battery is
being charged.
The battery is fully
charged.
GREEN
The spare battery is fully
charged.
